Crawl space mold cleanup followed by a sealed vapor barrier and moisture control, so the space stays dry and the mold does not climb into the living areas.

Crawl spaces are prone to high humidity, poor ventilation and water coming in from the ground. Mold can grow once relative humidity reaches 50%. When the air cools at night it holds less moisture, humidity climbs, and condensation forms on wood, insulation and anything else down there.
What grows in the crawl space does not stay there. It can damage the floor framing and affect the air in the rooms above.

We check for moisture sources, mold growth and structural concerns.
Professional containment and protective gear keep the work from cross-contaminating the house.
Mold is removed with EPA-registered products, surfaces are scrubbed, and wood may be sealed or treated with anti-microbials.
Vapor barriers, sump pumps, drainage improvements or full encapsulation, depending on the cause.
We confirm the space is clean and dry, with documentation for your records or a sale.
Encapsulation turns a damp crawl space into a dry one. After the space is cleaned and the mold removed, we install a sturdy vapor barrier that covers the entire floor and runs up the sidewalls to six inches below the floor joists, then seal it so ground moisture cannot get through.
Combined with proper insulation and venting, it keeps humidity below the 50% line where mold starts. We also offer long-term prevention plans.
A thermo-hygrometer shows both temperature and relative humidity, which is what you need, because humidity rises when the temperature drops overnight. Leave one in the crawl space and check it over a few days. Readings that keep sitting above 50% mean the space needs moisture control.
If it smells musty under the house already, start with a mold inspection.
Yes. The same humidity rules apply in basements, and we do basement mold removal as well.
It covers the whole floor and runs up the sidewalls to six inches below the floor joists, sealed so moisture cannot get through.
Only if ground moisture is the cause. Leaks, drainage and ventilation problems need their own fix, which is why we look for the source first.

Mold removal for basements, bathrooms, attics and wall cavities, with contaminated material cut out under containment and every surface HEPA cleaned.
Learn more
A walk-through by a certified inspector who looks for growth, moisture sources and hidden mold, then tells you plainly whether remediation is needed.
Learn more
Containment, removal and cleanup that follow industry guidelines, starting with the moisture problem that let the mold grow in the first place.
Learn moreTell us what you are seeing and where, and we will get back to you to set up a visit.